If Setup is Not Possible through USB Connection (Windows)

If a printer icon is not created in the [Printer] folder

The printer driver is not set up correctly. Set up the printer driver again.

The port for the print destination is not set correctly with the printer driver. Check the settings as follows:

Click [Start], and then select [Devices and Printers].
Right-click the [OKI B432] icon, and then select [B432(*)] from [Printer properties].

* Select a printer driver type to use.

For connection with a USB cable

[USBxxx]

If [USBxxx] is not displayed in the list, check that the printer is turned on, re-connect the USB cable, and then perform steps 1 to 3 again.

You must set up the printer driver by using Plug-and-Play. Check that you set up the printer driver by taking the following procedure:

Check that the printer and computer are turned off.
Connect a USB cable.
Turn the printer on.
Start the computer.
When "Add New Hardware Wizard" is displayed, follow the on-screen instructions to perform the setup operation.

Note

For details, refer to "README.TXT" in the "Software DVD-ROM".

Symptom	Solution	Reference
The computer does not support the USB interface.	Check that the USB controller is displayed in Device Manager.	-
It is possible that the USB cable does not meet the standard.	Use a USB 2.0 cable.	-
The interface is disabled.	Set [USB] to "ENABLE" in the printer's menu settings.	USB SETUP
The setup procedure is incorrect.	Perform the setup procedure from the beginning again.	-
The USB cable is disconnected.	Insert the USB cable.	Connecting a Computer to the Printer via a USB Interface
There may be a problem with the USB cable.	Replace it with a spare USB cable, if available.	-
A USB hub is used.	Connect the printer to the computer directly.	-
The setup operation has been stopped.	Perform the setup operation from the beginning according to the procedure.	-